Epson Nx430 Printer Error Turn Power Off and Then on Again For Details Wont Print Wont Feed

Problem Solver

Diagnosing the Trouble

Error indicators
EPSON Status Monitor
Running a printer operation check

If yous are connecting via the USB interface and are having difficulty printing, the problem may be related to your USB connection. Refer to Correcting USB Problems for details.

If your problem is non USB related, troubleshooting printer problems is best handled in two easy steps: showtime diagnose the problem, so apply likely solutions until the trouble is stock-still.

The data that yous demand to diagnose and solve most common issues is provided past the printer'south control console, the EPSON Status Monitor utility, or past running a printer performance check. Refer to the appropriate section below.

If yous have a specific problem relating to print quality, a printout problem not related to impress quality, or a paper feeding trouble, or if the printer does not impress at all, refer to the advisable section in this chapter.

To solve a trouble, you may need to abolish printing. For details, encounter Cancelling Printing.

Error indicators

You can identify many mutual printer issues using the lights on your printer'south control console. If your printer stops working and the lights are on or flashing, apply the post-obit table of console lite patterns to diagnose the problem, then try the recommended solution. If the status of the power low-cal is non shown, it is on or flashing.

Lights	Problem and Solution
	Paper out
	No paper is loaded in the printer.	Load paper in the sail feeder, then press the  newspaper button. Printer volition resume printing and the light will turn off.
	Newspaper jam
	Paper has jammed in the printer.	Printing the  paper button to eject the jammed newspaper. If the error does non clear, open the printer encompass and remove all of the paper inside, including whatever torn pieces. Then, reload the newspaper in the sheet feeder and press the  paper push to resume printing.
	Ink depression
	The ink cartridge is nearly empty.	Obtain a replacement black (T0321), cyan (T0422), magenta (T0423), or xanthous (T0424) ink cartridge. To decide which cartridge is most empty, check the ink level using EPSON Condition Monitor iii (Windows) or EPSON StatusMonitor (Macintosh).
	Ink out
	The ink cartridge is empty or not installed.	Supplant the black (T0321), cyan (T0422), magenta (T0423), or yellow (T0424) ink cartridge with a new one. If the ink end error occurs after the print caput moves to its home position, the ink cartridge may not exist installed properly. Reinstall the ink cartridge until it clicks into place.
	Wrong cartridge
	The installed ink cartridge is not compatible with the printer.	Use the appropriate black (T0321), cyan (T0422), magenta (T0423) or xanthous (T0424) ink cartridge.
	Incorrectly installed ink cartridge
	The ink cartridge is not installed correctly.	If the impress head is at the abode position, press the ink button to motility the print head to the ink cartridge replacement position. Remove and reinsert the ink cartridge. Then go along with ink cartridge installation. If the impress head is at the ink cartridge replacement position, remove and reinsert the ink cartridge. So keep with ink cartridge installation.
	Wagon error
	The print caput carriage is obstructed by jammed paper or other foreign material and cannot return to the dwelling house position.	Plow off the printer. Open up the printer embrace and remove whatever newspaper or other obstructions from the paper path by mitt. And then, plow the printer back on. If the error does non clear, contact your dealer.
	Unknown printer error
	An unknown printer error has occurred.	Plough off the printer and contact your dealer.

[Top]

EPSON Status Monitor

The EPSON Status Monitor utility provides status messages and a graphic display showing the current status of the printer.

If a problem occurs while press, an error message appears in the Progress Meter window.

When the ink is out, click How To in the EPSON Condition Monitor or Progress Meter window and EPSON Status Monitor will lead you lot step-by-step through the cartridge replacement procedure.

[Top]

Running a printer performance check

If you lot are unable to determine the source of the trouble, performing a printer functioning bank check can assistance yous determine whether the problem comes from the printer or the reckoner.

To print a printer operation bank check page, follow these steps.

If you use the parallel interface, make certain that both the printer and computer are turned off. If yous apply the USB interface, brand certain that the PC is on and the printer is turned off.

Disconnect the cable from the printer'south interface connector.

If you utilise the parallel interface, unlock the wire clips on both sides of the interface connector, remove the ground connector if necessary, and and so disconnect the cable from the printer's interface connector.

If yous apply the USB interface, make sure that your PC is on when connecting the cable; otherwise, the PC may non recognize the printer.

Brand sure that A4 or Letter size newspaper is loaded in the sheet feeder.

The printer prints an operation check folio which includes the version of your printer's ROM, the ink counter code, and a nozzle check pattern.

Compare the quality of the printed exam page with the sample shown below. If there are no print quality problems, the printer itself is fine and the problem probably lies with the printer software settings, the application settings, the interface cable (exist sure to use a shielded cablevision), or the calculator itself.

If the test page does not impress satisfactorily, there is a problem with the printer. For example, if bands appear in the check blueprint as shown below, this could mean a chock-full ink nozzle or a misaligned print head.

[Pinnacle]

Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION

shafferbetand.blogspot.com

Source: https://files.support.epson.com/htmldocs/sc82__/sc82__rf/trble_1.htm